Long lasting floor coatings start planning and proper installation
Preparation is just as important as your coating choice. An expensive floor can quickly bubble up or chip away if the surface is not ready for the application.
The floor must be sanded or ground down to a solid foundation without dust and chips that can properly bond with new coatings. Next, any cracks that might allow moisture seepage need to be properly filled and then leveled to the flatness that you desire.
The type and number of coatings will depend upon your specific need: A computer chip manufacturers need a dust free, static dissipative surface. Food processors need odor-free, slip resistant coatings that will withstand constant wetness, high heat and daily pressure washing. Airplane Hangars need fuel and oil resistant coatings that withstand the weight and impact of heavy loads.
What our customers are saying…
An FEI very specific need for our Electron Ion Beam Microscopes on the Production floor. We asked Kim and his team to grind our existing Epoxy floor and maintain a floor levelness of 1.5mm per meter within our ISO class 7 Cleanroom Environment. The total area was around 2,400 sq. ft. This is a very difficult task to maintain in itself and yet to do this while maintaining that sort of cleanliness with Dynamic Particulate Counters in the area. The Root’s team managed to get this done without polluting the clean room environment. The tenting system was enormous!
These guys are professional in every sense of the word and put out high quality work with epoxy substrates. Tom Smith
The quality of your service and work is superb and it has truly been a pleasure to work with Root’s.
In dealing with many different contractors it is refreshing when you are able to establish a working relationship with people whose character you trust as much as their work. With Root’s, we have tremendous confidence in both. Martin Guidry
They have a professional crew, know their products, plan their work out very well and have left us very satisfied years later. They stand behind their products and their workmanship and will not leave a problem.
I strongly recommend Root’s Floor Coatings and will use them again! Lew Feucht
We have found the Root’s Floor Coatings team to be very professional, ethical, extremely knowledgeable of the variety of products in the marketplace, diligent workers providing a high quality end product, reasonably priced and most of all more than honorable when there may have been a warranty callback or a change in scope.
I would not hesitate to recommend Root’s. Ellen Yank